ABS vs PA6 GF30: 0% composition overlap. Significantly different materials serving different application areas.
ABS vs PA6 GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
ABS
Acrylonitrile Butadiene Styrene — the most widely used amorphous engineering/commodity thermoplastic. Excellent balance of toughness, rigidity, and processability. Good surface finish and paintability. Not UV-stable without additives. Trade names include Novodur (INEOS Styrolution), Terluran (INEOS), Cycolac (SABIC). Used for automotive interior trim, appliance housings (vacuum cleaners, monitors), LEGO bricks, 3D printing filament, and pipe fittings.
PA6 GF30
Polyamide 6 with 30% short glass fiber reinforcement — the industry standard for metal replacement in structural injection-molded parts. UTS doubles vs unfilled PA6 (175 vs 80 MPa), stiffness triples (E-Mod 9.5 vs 3.0 GPa), and HDT jumps to 200°C+. The classic materialref.com differentiation case: Ultramid B3WG6 (BASF) = Zytel 73G30 (DuPont) = Durethan BKV 30 (LANXESS) = Akulon K224-G6 (DSM) = Grilon BG-30 (EMS) = Technyl C216 V30 (Domo) — all the same base material. Used for automotive brackets, engine covers, power tool housings, electrical connectors, and structural inserts.
| ABS | PA6 GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 10350 |
Mechanical properties
| Property | ABS | PA6 GF30 | Unit |
|---|---|---|---|
| tensile_strength | 38–50 | 170–185 | MPa |
| yield_strength | 40–48 | — | MPa |
| elongation | 10–30 | 3–4 | % |
Compatibility Assessment
ABS and PA6 GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ABS the same as PA6 GF30?
ABS and PA6 GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ABS with PA6 GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ABS and PA6 GF30?
The main differences are in the following elements: overall alloying content. ABS is a Polymers grade, while PA6 GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.