ABS vs PE-LLD (Linear Low-Density Polyethylene): 0% composition overlap. Significantly different materials serving different application areas.
ABS vs PE-LLD (Linear Low-Density Polyethylene)
Side-by-side chemical composition and mechanical property comparison.
Overview
ABS
Acrylonitrile Butadiene Styrene — the most widely used amorphous engineering/commodity thermoplastic. Excellent balance of toughness, rigidity, and processability. Good surface finish and paintability. Not UV-stable without additives. Trade names include Novodur (INEOS Styrolution), Terluran (INEOS), Cycolac (SABIC). Used for automotive interior trim, appliance housings (vacuum cleaners, monitors), LEGO bricks, 3D printing filament, and pipe fittings.
PE-LLD (Linear Low-Density Polyethylene)
Linear low-density polyethylene — short-chain branching via copolymerization with alpha-olefins (butene, hexene, octene). Better puncture resistance, tear strength, and seal strength than PE-LD at same density. THE modern stretch wrap and food packaging film. Also used for agricultural film, liners, bags, and blown film. Largely replacing PE-LD in film applications.
| ABS | PE-LLD (Linear Low-Density Polyethylene) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 1872 |
Chemical composition (wt%) — Pro
| Element | ABS | PE-LLD (Linear Low-Density Polyethylene) | Overlap |
|---|---|---|---|
| Acrylonitrile | 15–35% | — | — |
| Butadiene | 5–30% | — | — |
| Styrene | 40–60% | — | — |
| Base Polymer (Polyethylene) | — | 92–99% | — |
| Alpha-Olefin Co-Monomer |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | ABS | PE-LLD (Linear Low-Density Polyethylene) | Unit |
|---|---|---|---|
| Tensile Strength | 38–50 | 15–30 | MPa |
| Yield Strength | 40–48 | — | MPa |
| Elongation | 10–30 | 400–800 | % |
| Elastic Modulus | |||
| Density | |||
| Glass Transition Temp (Tg) | |||
| Water Absorption (24h) | |||
| Tensile Strength | |||
| Tensile Modulus | |||
| Elongation at Break | |||
| Charpy Impact (notched) | |||
| Density | |||
| HDT/B (0.45 MPa) | |||
| Vicat Softening Temp | |||
| Water Absorption (24h) | |||
| Melting Point |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
ABS and PE-LLD (Linear Low-Density Polyethylene) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ABS the same as PE-LLD (Linear Low-Density Polyethylene)?
ABS and PE-LLD (Linear Low-Density Polyethylene) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ABS with PE-LLD (Linear Low-Density Polyethylene)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ABS and PE-LLD (Linear Low-Density Polyethylene)?
The main differences are in the following elements: overall alloying content. ABS is a Polymers grade, while PE-LLD (Linear Low-Density Polyethylene) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.