ABS vs PP GF30: 0% composition overlap. Significantly different materials serving different application areas.
ABS vs PP GF30
Side-by-side chemical composition and mechanical property comparison.
Overview
ABS
Acrylonitrile Butadiene Styrene — the most widely used amorphous engineering/commodity thermoplastic. Excellent balance of toughness, rigidity, and processability. Good surface finish and paintability. Not UV-stable without additives. Trade names include Novodur (INEOS Styrolution), Terluran (INEOS), Cycolac (SABIC). Used for automotive interior trim, appliance housings (vacuum cleaners, monitors), LEGO bricks, 3D printing filament, and pipe fittings.
PP GF30
Polypropylene with 30% short glass fiber — a cost-effective alternative to PA GF30 for applications up to ~130°C. Much cheaper base resin (PP vs PA), zero moisture sensitivity, and excellent chemical resistance. Lower strength than PA6 GF30 (UTS 80 vs 175 MPa) but sufficient for many structural parts. Trade names include Celstran PP-GF30 (Celanese), Tepex (LANXESS), Stamax (SABIC). Used for automotive front-end carriers, battery trays, HVAC components, and household appliance frames.
| ABS | PP GF30 | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | ISO 10350 | ISO 10350 |
Chemical composition (wt%) — Pro
| Element | ABS | PP GF30 | Overlap |
|---|---|---|---|
| Acrylonitrile | 15–35% | — | — |
| Butadiene | 5–30% | — | — |
| Styrene | 40–60% | — | — |
| Polypropylene (Base Polymer) | — | 68–72% | — |
| Glass Fiber Reinforcement |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeMechanical properties — Pro
| Property | ABS | PP GF30 | Unit |
|---|---|---|---|
| Tensile Strength | 38–50 | 70–90 | MPa |
| Yield Strength | 40–48 | — | MPa |
| Elongation | 10–30 | 3–5 | % |
| Elastic Modulus | |||
| Density | |||
| Glass Transition Temp (Tg) | |||
| Water Absorption (24h) | |||
| Tensile Strength | |||
| Tensile Modulus | |||
| Elongation at Break | |||
| Charpy Impact (notched) | |||
| Density | |||
| HDT/B (0.45 MPa) | |||
| Vicat Softening Temp | |||
| Water Absorption (24h) | |||
| Melting Point | |||
| hdt_1_8mpa |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
ABS and PP GF30 have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is ABS the same as PP GF30?
ABS and PP GF30 have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace ABS with PP GF30?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between ABS and PP GF30?
The main differences are in the following elements: overall alloying content. ABS is a Polymers grade, while PP GF30 is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.