FR-4 (Glass Epoxy Laminate) vs POM-C (Acetal Copolymer): 0% composition overlap. Significantly different materials serving different application areas.
FR-4 (Glass Epoxy Laminate) vs POM-C (Acetal Copolymer)
Side-by-side chemical composition and mechanical property comparison.
Overview
FR-4 (Glass Epoxy Laminate)
Flame retardant woven fiberglass cloth with epoxy resin binder — the worldwide standard substrate material for printed circuit boards (PCBs). Designated NEMA grade FR-4 and IPC-4101. Good mechanical strength, dimensional stability and electrical insulation up to 130°C (Tg). Dielectric constant 4.2–4.7 at 1 MHz. Self-extinguishing (UL94 V-0). Used for single/multilayer PCBs, electrical insulation boards, structural composites in electronics, test fixtures and jigs. Available in thicknesses 0.1–50 mm.
POM-C (Acetal Copolymer)
Polyoxymethylene Copolymer — the precision engineering plastic. Exceptional dimensional stability, low moisture absorption (0.2%), low friction coefficient, and excellent machinability. More hydrolysis-resistant and chemically stable than POM-H (homopolymer). No centerline porosity in stock shapes. Trade names include Hostaform (Celanese), Ertacetal C (MCAM), Duracon (Polyplastics). Used for gears, bearings, valve bodies, pump parts, electrical insulators, and food/medical contact parts.
| FR-4 (Glass Epoxy Laminate) | POM-C (Acetal Copolymer) | |
|---|---|---|
| Material Number | — | — |
| Category | Polymers | Polymers |
| Standard | IPC-4101 | ISO 10350 |
Chemical composition (wt%) — Pro
| Element | FR-4 (Glass Epoxy Laminate) | POM-C (Acetal Copolymer) | Overlap |
|---|---|---|---|
| Epoxy Resin Matrix | 35–45% | — | — |
| Glass Fiber (E-Glass) Cloth | 55–65% | — | — |
| Polyoxymethylene (OCH2 units) | — | 95–99% | — |
| Ethylene Oxide Co-Monomer | — | 1–5% | — |
Mechanical properties — Pro
| Property | FR-4 (Glass Epoxy Laminate) | POM-C (Acetal Copolymer) | Unit |
|---|---|---|---|
| Flexural Strength | 380–480 | — | MPa |
| Tensile Strength | 280–340 | — | MPa |
| Compressive Strength | 350–420 | — | MPa |
| Density | |||
| Glass Transition Temp (Tg) | |||
| Dielectric Constant (1MHz) | |||
| Dielectric Strength | |||
| UL94 Flammability | |||
| Water Absorption (24h) | |||
| Tensile Strength | |||
| Yield Strength | |||
| Elongation | |||
| Elastic Modulus | |||
| Density | |||
| Melting Point | |||
| Water Absorption (24h) | |||
| Continuous Use Temp |
Sign up free and get 3 full comparisons immediately.
Sign up free — 3 comparisons/day freeCompatibility Assessment
FR-4 (Glass Epoxy Laminate) and POM-C (Acetal Copolymer) have significantly different compositions (0% overlap). These materials are not interchangeable and serve different application areas.
Automated assessment based on composition analysis
Frequently Asked Questions
Is FR-4 (Glass Epoxy Laminate) the same as POM-C (Acetal Copolymer)?
FR-4 (Glass Epoxy Laminate) and POM-C (Acetal Copolymer) have a 0% composition overlap. They are generally not directly interchangeable.
Can I replace FR-4 (Glass Epoxy Laminate) with POM-C (Acetal Copolymer)?
Generally not recommended. The compositions differ significantly (0% overlap). These materials have different alloying concepts and are intended for different applications.
What is the difference between FR-4 (Glass Epoxy Laminate) and POM-C (Acetal Copolymer)?
The main differences are in the following elements: overall alloying content. FR-4 (Glass Epoxy Laminate) is a Polymers grade, while POM-C (Acetal Copolymer) is a Polymers grade.
Related Comparisons
View full data for each material:
Data provided for reference only. Always verify against the applicable specification for critical applications.
All data is for reference only. Equivalents indicate similarity, not identity. Always verify against the applicable specification for safety-critical applications. materialref.com accepts no liability for decisions based on this data.