Materials database

The most widely used duplex (austenitic-ferritic) stainless steel. Balanced 50/50 microstructure provides twice the yield strength of 304/316L with superior chloride and stress corrosion resistance. Used in oil & gas, chemical processing, marine, and pulp & paper industries.

Lean duplex stainless steel with minimal Ni and Mo — the most cost-effective duplex grade. Uses Mn and N instead of expensive Ni for austenite stability. Double the yield strength of 304 (450 MPa vs 190 MPa). Used as a direct replacement for 304/316L where higher strength or better SCC resistance is needed.

Lean duplex stainless steel with low Mo content. More economical than 2205 with better corrosion resistance than 304/316L. Developed for construction, water treatment, and storage tanks where full duplex properties are not required.

Super duplex stainless steel with PREN >40. Superior corrosion resistance to standard 2205 duplex, especially in chloride and H₂S environments. Used for subsea pipelines, offshore platform components, desalination plants, and chemical processing equipment.

The most widely used duplex stainless steel worldwide (SAF 2205 / UNS S31803/S32205). Austenitic-ferritic microstructure provides ~2× yield strength of 304/316 (≥450 MPa) with excellent resistance to stress corrosion cracking, pitting (PREN 33-38), and intergranular corrosion. Service temperature -50°C to 300°C. Used for oil & gas production tubing, chemical processing vessels, desalination plants, pulp & paper digesters, heat exchangers, and bridge structures. Weldable with ER2209 filler.

Super duplex stainless steel (SAF 2507 / UNS S32750) with 25% Cr, 7% Ni, 4% Mo, and high N for PREN ≥42. The highest corrosion resistance and strength among standard duplex grades — YS ≥550 MPa is ~2.5× that of 316L. Service temperature up to 300°C. Used for subsea oil & gas equipment (manifolds, trees, risers), desalination plants, flue gas cleaning, chemical tankers, and mining equipment in severe chloride environments. Requires careful welding to avoid sigma phase.

Lean duplex stainless steel (SAF 2304 / UNS S32304) with reduced Mo and Ni content compared to 2205. Cost-effective alternative to austenitic 316L with ~2× yield strength (400 MPa) and good stress corrosion cracking resistance. No Mo addition — relies on Cr+N for corrosion resistance (PREN ~25). Used for storage tanks, water heaters, transport tanks, structural applications in construction (e.g. reinforcing bar), and swimming pool structures. The budget-friendly duplex option.